NO HOT WATER? Follow These EASY Tips

NO HOT WATER? Follow These EASY Tips

Blog Article

Go Services

How do you feel when it comes to No Hot Water — Water Heater Repair?

No Hot Water — Water Heater Repair
Many modern houses utilize an electrical hot water heater for their furnace, due to its benefit as well as convenience of use. Nonetheless, just like any other electrical home appliances, issues might emerge with its use, unexpectedly. It can be really aggravating to get up to a cool shower as opposed to a warm one or having your bathroom with water that isn't warm adequate or perhaps too hot. Whatever the case may be, water heater issues can be rather stressful. Luckily, we've made a listing of feasible options to your hot water heater concerns. There are a variety of variables that might trigger much of these issues, it could be a problem with the power supply, the electrical heating element, or the thermostat. Before doing anything, ensure you shut off the primary power supply for security. Whatever the issue is, getting it repaired should not pose too much of a problem if you comply with these actions:

Inspect Your Power Supply:

As standard as this might appear, it is really needed. Without appropriate power, your hot water heater will not function. So the first thing to do when your water all of a sudden stops working is to confirm that it isn't a power trouble. Examine if the fuse is burnt out or the breaker tripped. If the circuit breaker is the issue, merely transform it on and off once again. Change any type of damaged or worn-out fuse. Test the device with power after these adjustments to see if it's now working.

Check the Burner in the Hot Water Heater:

If it's not a power issue, then attempt looking into your burner if it is still functioning. Check each of your heating elements to be sure the problem isn't with any of them. If any of them is faulty, change that component and after that check whether the hot water is back on.

Examine Your Thermostat:

If your hot water heater still isn't working or the water coming out isn't warm sufficient, you may need to examine the temperature level setups on your upper thermostat. Make sure the circuit breaker is switched off before doing anything. Open up the gain access to panel and press the red switch for temperature reset over the thermostat. This must help warm the water. Turn the circuit breaker back on and also inspect if the trouble has actually been dealt with.

Call A Specialist:

If after replacing all faulty components and resetting your temperature level, the hot water heater still isn't working, you might need to contact a specialist plumber for a professional point of view. The problem with your heating system could be that the hot and cold faucets have been switched over or it may be undersized for the quantity of hot water required in your home. Whatever the instance may be, a specialist plumber would assist address the issue.


Water heater troubles are not always significant. A lot of them result from minor problems like a blown fuse or damaged heating element. Changing the faulty components should work. Nevertheless, if you are still incapable to resolve the trouble, give a call to your nearby plumber to come to get it repaired.

What To Do If Your Hot Water Suddenly Stops Working

The water heater tripped the circuit breaker

The occasional power surge can sometimes cause your large appliances to trip their circuit breaker. Head to your electrical panel to see if the switch associated with your water heater needs to be reset

Your water heater’s fuel supply has been shut off.

If you own a gas or propane water heater, someone might have closed the gas valve. Without gas, your water heater can’t heat water. Ensure the valve is in the “open” position (parallel to the gas line, as opposed to perpendicular to it). If you smell gas (a “rotten egg” smell) or hear the hissing sound of a gas leak, evacuate your home at once, notify your utility company from a safe distance away, and contact a professional to repair your gas line.

The water heater’s pilot light is out.

Although newer water heaters no longer have pilot lights, it’s commonplace for older gas water heaters to have them. Typically, you can find instructions for relighting the pilot light somewhere on the side of the water heater tank, in the owner’s manual, or in online instructions from the manufacturer. Of course, you can always consult a qualified plumber regarding water heater pilot light issues as well.

There’s a problem with the water heater’s burner.

  • Wait for the burner to turn off. If you have no hot water, it’s probably off already. Once it’s off, set your water heater’s thermostat to 120°F.

  • Go to a faucet and turn on the hot water. Let it continue to run for a minute or so while you check on the burner.

  • Observe to see if the burner ignites. If it does, you can adjust the temperature as needed while the water still runs. However, the Consumer Product Safety Commission (CPSC) strongly recommends a temperature no higher than 120°F to prevent scalding.

  • If your burner does not ignite, there’s most likely a problem with the thermostat. You’ll need a plumbing professional to repair it.

  • The water heater’s capacity is too small.

    If you own a storage tank water heater, sometimes a couple of showers in a row can use up most of the hot water stored in the tank. Then, when it’s time for the next person to shower, they’ll run out of stored hot water partway through and then they'll experience water not getting hot. You have some options:

  • Wait longer before showering so the hot water can “fill up” again.

  • Upgrade to a water heater with a bigger tank.

  • Switch to an on-demand (or tankless) water heater.

  • Do You Have a Faulty Heating Element?

    Hot water is heated by one or more heating elements that are located at the bottom of the hot water heater. Due to sediment cover, these elements become less effective at heating water. Even without sediment buildup, heating elements can become damaged and inefficient after years of regular use.

    In the event that the hot water heater's heating element fails, the water will be lukewarm throughout the home. You can restore hot water to your home by contacting a plumber or hot water heater technician.

    I hope you enjoyed reading our piece about Hot Water Heater Repair. Thanks so much for finding the time to read our piece. Are you aware of another person who is excited about No Hot Water — Water Heater Repair? Please feel free to share it. I recognize the value of reading our article about Hot Water Heater Repair.

    Book Your Appointment

    Report this page